by eliminating water creepage the easy slate system will allow any type of slate
to be installed as low as 12 deg
|
Suitable for any type of slate, Lower maintenance, Improve aesthetics, Versatile, No staining or streaking, Works with any slate & any system (including manmade with rivets and all natural with either nails or spiked slate hooks), |
Ventilation upgrade to "open air roof covering" allowing a considerable improvement in roof ventilation when used with our breather membranes, High performance rubber seals cushion the slates offering a considerable improvement in wind up lift, Improve the performance of any slate roof by over 200%.
|
 |
Easy slate |
 |
Eliminates the angle of creep and allows slates to be laid on a roof with a pitch as low as 12 degrees. Improves the ventilation of the roof through the slates when used with a breather membrane. Cushions the slates and reduces breakage. 500mm long&100 per box, 600mm long&100 per box, 3mtr long & 10 lengths per pack. 
"The Permavent Easy Slate system significantly improves the resistance of both natural and fibre cement slates to wind driven rain."
BRE (Building research establishment - Test report 273-259)
|
 |
Easy verge |
 |
Will remain permanently watertight and eliminate the verge batten rot that causes the loss of slates, using our unique flexible super seals. The best looking slate verge available that even allows for a cambered edge. No need for undercloak. Works at low pitch. Fast efficient & maintenance free. 3mtr long & 10 lengths per pack.
The unique alternative to traditional cement verge.
|
 |
Easy soaker |
 |
Made from the highest grade high impact plastic and incorporating our unique super seals that completely weather proof on a pitch as low as 12 degrees. Installation over the battens is a fast and cost effective soaker system that will work on dormer cheeks without a saddle and will not stain the roof like lead. 3mtr long & 10 lengths per pack.
|
 |
Easy valley |
 |
Made from the highest grade high impact plastic and incorporating our unique super seals that will perform at a low pitch. Easy valley is low maintenance as the slates cannot slip. Installation over the battens saves time and even allows for dormer valleys. 3mtr long & 10 lengths per pack. Easy valley cap. Every valley looks perfect with the easy valley cap. The unique cover system will improve the performance of the valley by increasing the flow of water, eliminating slate slippage as well as ensuring that even badly cut valleys always look perfect. 1mtr long & 10 lengths per pack. 
|
 |
Easy tray |
 |
Suitable for all types of slate, all profiled tiles, metal & corrugated sheetings. 1.2mtr long & 10 lengths per pack. 600 per pallet. 
|
Contacts |
Please fill in the following form, and one of the our team will contact you.
|
11 Cumberland Drive, |
